SCHWEGO® mar 8311
| Slip additive for water-based and solvent borne coating systems, VOC-free |
 |
 Technical data sheet |
| Chemical base: | Silicone polymer | |
| Properties: | The addition of SCHWEGO mar 8311 to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO mar 8311 improves slip, therefore even surface is formed and hence also film hardness increased. The tendency to dirt retention is diminished, disposition to foaming is reduced and gloss is conserved. | |
| FDA-approval: | The non-volatile compounds of SCHWEGO mar 8311 are listed in FDA (U.S. Food & Drug Administration), title 21 CFR. Details are visible in our Regulatory Information Sheet. | |
| Applications: | SCHWEGO mar 8311 is mainly used in solvent borne air drying and stoving coating systems. SCHWEGO mar 8311 can be used in most binder systems except some with hydroxyl groups. | |
| Technical data: (Guide values) |
Appearance : clear to slightly turbid liquid Density (ISO 2811-1) : 0.96 g/cm³ Flash point (ISO 1523) : > 275 °C Non volatile content (ISO 3251) : 100 % |
|
| Processing: | The addition amount of SCHWEGO mar 8311 is 0.02 - 0.20 % calculated on total formulation. SCHWEGO mar 8311 should be added at the beginning of the production. Post addition is possible, if SCHWEGO mar 8311 is homogeneously distributed. Due to low dosage predilution in one of the solvents of the formulation is recommended. | |
| Storage: | Do not store SCHWEGO mar 8311 at temperatures below 0 °C and above 30 °C. Stir it up befor use. Keep it in a cool, well-ventilated place. Subject to appropriate storage, the described properties of SCHWEGO mar 8311 remain stable for at least 2 years, provided the original container is closed after use. | |
| Packaging: | 50/200 kg drum | |
| The above information is based on our current knowledge and experience. No binding assurance in respect of certain properties or suitability for certain applications must be read into our information. Patent rights and other proprietary rights must be observed if necessary. Further safety instructions please learn from our material safety data sheet. | ||