SCHWEGO® antimec 8010
|
Antiskinning additive for water-based and solvent-borne coating systems, free of ketoxime and aromates |
 |
 Technical data sheet |
| Chemical base: | Antioxidant in solvent mixture | |
| Properties: | SCHWEGO antimec 8010 has the following properties/fields of application:
|
|
| Mode of action: | 1. Viscosity stabilisation The stabilisation is based on the oxygen binding properties of the antioxidant. SCHWEGO antimec 8010 promotes flow and through drying. 2. Avoidance of skinning Thanks to a special ingredient reactions caused by oxygen are suppressed. |
|
| Applications: | SCHWEGO antimec 8010 is recommended in almost all water-based and solvent borne coating systems. Effectiveness of antiskinning may be reduced in long oil alkyd systems. | |
| Technical data: (Guide values) |
Appearance : clear, yellow liquid Density (ISO 2811-1) : 0,91 g/cm³ Flash point (ISO 1523) : 29,5 °C |
|
| Processing: | SCHWEGO antimec 8010 can be added to the coating at any formulation step. We recommend the addition at the let down process after the siccatives. The optimum dosage should be evaluated by preliminary laboratory experiments. An addition of 0.5 – 1.5 % calculated on total system is recommended. | |
| Storage: | Keep SCHWEGO antimec 8010 in a cool, well-ventilated place. Occasionally, slight sediment is formed. This does not adversely affect the quality of SCHWEGO antimec 8010 and there is no need to stir up the sediment. Subject to appropiate storage, the described properties of SCHWEGO antimec 8010 remain stable for at least 2 years, provided the original container is closed after use. | |
| Packaging: | 50/175 kg drum | |
| The above information is based on our current knowledge and experience. No binding assurance in respect of certain properties or suitability for certain applications must be read into our information. Patent rights and other proprietary rights must be observed if necessary. Further safety instructions please learn from our material safety data sheet. | ||