SCHWEGO® eco foam 6320
| Deaerator for non aqueous nature paints, VOC-free |
 |
 Technical data sheet |
| Chemical base: | Mixture renwable raw materials with polymers | |
| Properties: | SCHWEGO eco foam 6320 is a mixture of renewable raw materials with polymers. The content of renewable raw materials is in SCHWEGO eco foam 6320 58% (ASTM D 6866). SCHWEGO eco foam 6320 prevents foam at the dispersion process and deaerates the film during the drying. SCHWEGO eco foam 6320 is a development special for non aqueous formulations with high content of renewable raw materials so called “green paints or bio-paints”. But the use in conventional solvent-based paints is also possible. SCHWEGO eco foam 6320 is free of VOC. |
|
| Applications: | SCHWEGO eco foam 6320 shows good defoaming and deaerating in following systems:
|
|
| Technical data: (Guide values) |
Appearance : transparent liquid Density (ISO 2811-1) : 0,86 g/cm³ Flash point (ISO 1523 ) : >110°C Active mattert : 100 % |
|
| Processing: | SCHWEGO eco foam 6320 can be incorporated in the mill base, but in the let down is also possible, if SCHWEGO eco foam 6320 is homogeneously distributed. The dosage is dependent from the requirement. Normally between 0.1% - 1.0% , calculated at the ready paint. If necessary a higher dosage is also possible. | |
| Storage: | Stir SCHWEGO eco foam 6320 up before use. Keep it in a cool, well-ventilated place. Subject to appropriate storage, the described properties of SCHWEGO eco foam 6320 remain stable for at least 18 months, provided the original container is closed after use. |
|
| Packaging: | 50/175 kg drum | |
| The above information is based on our current knowledge and experience. No binding assurance in respect of certain properties or suitability for certain applications must be read into our information. Patent rights and other proprietary rights must be observed if necessary. Further safety instructions please learn from our material safety data sheet. | ||